HP ampli guitare Eminence Legend CB15 [LEGEND CB15-8] Avis/Critiques Recommended for professional bass guitar applications in a sealed or vented
enclosure.
SPECIFICATION Nominal Basket
Diameter 15", 381mm Nominal Impedance* 8 ohms Power
Rating Watts 300W Music Program 600W
Resonance 34Hz Usable Frequency Range 47Hz-3kHz Sensitivity***
98 Magnet Weight 80 oz. Gap Height 0.375", 9.53mm Voice
Coil Diameter 2.5", 63.5mm
 THIELE & SMALL
PARAMETERS Resonant Frequency (fs) 34Hz
DC Resistance (Re) 6.15 Coil Inductance (Le) 0.33mH
Mechanical Q (Qms) 5.9 Electromagnetic Q (Qes) 0.36
Total Q (Qts) 0.34 Compliance Equivalent Volume (Vas) 336
liters / 11.9 cu.ft. Peak Diaphragm Displacement Volume (Vd) 411cc
Mechanical Compliance of Suspension (Cms) 0.31mm/N BL
Product (BL) 16.0 T-M Diaphram Mass inc. Airload
(Mms) 70 grams Efficiency Bandwidth Product (EBP)
95 Maximum Linear Excursion (Xmax) 4.8mm
Surface Area of Cone (Sd) 856.3 cm2 Maximum Mechanical
Limit (Xlim) 9.5mm
MOUNTING INFORMATION
Recommended Enclosure Sealed 54-65 liters/
1.9-2.3 cu.ft. Vented 54-159 liters/ 1.9-5.6 cu.ft.
Overall Diameter 15.21", 386.4mm Baffle Hole
Diameter 14.0", 355.3mm Front Sealing Gasket fitted
as standard Rear Sealing Gasket fitted as
standard Mounting Holes Diameter 0.28", 7.1mm
Mounting Holes B.C. D. 14.56", 369.9mm Depth 6.5",
165mm Net Weight 17.3 lbs., 7.9 kg
Shipping Weight 19.4 lbs., 8.8 kg
MATERIALS OF
CONSTRUCTION Coil Construction
Copper voice coil Coil Former Polyimide former
Magnet Composition Ferrite magnet Core Details
Vented and extended core Basket Materials Die-cast
aluminum basket Cone Composition Paper Cone
Cone Edge Composition Cloth cone edge Dustcap
Composition Solid composition paper dust cap
FOOTNOTES * Please consult
eminence.com for specifications of models with alternative impedances. **
Multiple units exceed published rating evaluated under EIA 426A noise source and
test standard while in a free-air, non-temperature controlled environment.
*** The average output across the usable frequency range when applying 1W/1M
into the nominal impedance. Ie: 2.83V/8ohms, 4V/16ohms. Eminence response curves
are measured under the following conditions: All speakers are tested at 1w/1m
using a variety of test set-ups for the appropriate impedance | LMS using 0.25”
supplied microphone (software calibrated) mounted 1m from wall/baffle | 2ft. X
2ft. baffle is built into the wall with the speaker mounted flush against a
steel ring for minimum diffraction | Hafler P1500 Trans-Nova amplifier | 2700
cu.ft. chamber with fiberglass on all six surfaces (three with custom-made
wedges). **** BETA 8CX, 10CX, 12CX and ACOUSTINATOR™ CX2008 are coaxial
speakers with tweeter sold separately. Published Usable Frequency response
contingent upon use of APT 50 HF Driver.
|