Haut parleur Eminence BETA-10A [BETA-10A-8] Avis/Critiques Recommended for professional audio, bass guitar, mid-bass or floor monitor applications in sealed enclosures. Also works well as a mid-bass or woofer in vented enclosures.
SPECIFICATION Nominal Basket Diameter 10", 254mm Nominal Impedance* 8 ohms Power Rating Watts 250W Music Program 500W Resonance 53Hz Usable Frequency Range 51Hz-3.8kHz Sensitivity*** 97 Magnet Weight 34 oz. Gap Height 0.312", 7.92mm Voice Coil Diameter 2", 50.8mm
 THIELE & SMALL PARAMETERS Resonant Frequency (fs) 53Hz DC Resistance (Re) 5.75 Coil Inductance (Le) 0.67mH Mechanical Q (Qms) 8.14 Electromagnetic Q (Qes) 0.52 Total Q (Qts) 0.49 Compliance Equivalent Volume (Vas) 60.1 liters / 2.1 cu.ft. Peak Diaphragm Displacement Volume (Vd) 102cc Mechanical Compliance of Suspension (Cms) 0.36mm/N BL Product (BL) 9.6 T-M Diaphram Mass inc. Airload (Mms) 25 grams Efficiency Bandwidth Product (EBP) 103 Maximum Linear Excursion (Xmax) 3.0mm Surface Area of Cone (Sd) 344.9 cm2 Maximum Mechanical Limit (Xlim) 8.6mm MOUNTING INFORMATION Recommended Enclosure Sealed 8.5-14.2 liters/0.3-0.5 cu.ft. Vented 19.8-70.8 liters/0.7-2.5 cu.ft. Overall Diameter 10.11", 256.8mm Baffle Hole Diameter 9.13", 231.8mm Front Sealing Gasket fitted as standard Rear Sealing Gasket fitted as standard Mounting Holes Diameter 0.23", 5.7mm Mounting Holes B.C. D. 9.6", 243.8mm Depth 3.98", 101mm Net Weight 6.8 lbs., 3.1 kg Shipping Weight 7.8 lbs., 3.6 kg MATERIALS OF CONSTRUCTION Coil Construction Aluminum voice coil Coil Former Polyimide former Magnet Composition Ferrite magnet Core Details Vented core Basket Materials Pressed steel basket Cone Composition Paper Cone Cone Edge Composition Cloth cone edge Dustcap Composition Solid composition paper dust cap
FOOTNOTES * Please consult eminence.com for specifications of models with alternative impedances. ** Multiple units exceed published rating evaluated under EIA 426A noise source and test standard while in a free-air, non-temperature controlled environment. *** The average output across the usable frequency range when applying 1W/1M into the nominal impedance. Ie: 2.83V/8ohms, 4V/16ohms. Eminence response curves are measured under the following conditions: All speakers are tested at 1w/1m using a variety of test set-ups for the appropriate impedance | LMS using 0.25” supplied microphone (software calibrated) mounted 1m from wall/baffle | 2ft. X 2ft. baffle is built into the wall with the speaker mounted flush against a steel ring for minimum diffraction | Hafler P1500 Trans-Nova amplifier | 2700 cu.ft. chamber with fiberglass on all six surfaces (three with custom-made wedges). **** BETA 8CX, 10CX, 12CX and ACOUSTINATOR™ CX2008 are coaxial speakers with tweeter sold separately. Published Usable Frequency response contingent upon use of APT 50 HF Driver.
|