Haut-parleur coaxial Beyma 10XC25
[10XC25-8+16] Avis/Critiques

This 10" coaxial loudspeaker has been designed in order to achieve an excellent compromise between power handling, efficiency and weight. Its low frequency unit features a 2.5" (62.4 mm) aluminium voice coil which handles 250 w AES, while the high frequency unit features a 1.75” (44.4 mm) edgewound aluminium ribbon voice coil which yields a 40 w AES power handling. The combination of these two drivers give as a result an extended and linear frequency response with low distortion and high efficiency. Moreover, this dual loudspeaker has a relatively low weight (5.1 kg.) that makes easier to fit it with a compact bass-reflex enclosure.

Key features :
10" bass loudspeaker and 1” exit compression driver combination
High power handling: 250 w AES (L.F. unit) and 40 w AES (H.F. unit)
Extended and linear frequency response (55-20000 Hz)
High sensitivity: 98 dB (L.F. unit) and 105 dB (H.F. unit)
Low weight (neodymium compression driver)
Bass loudspeaker designed for compact bass-reflex cabinets

Technical Specifications :
 
L.F. Unit
Nominal Diameter 250 mm. 10 in.
Rated Impedance  8 ohms.
Minimum impedance  7.3 ohms.
Power capacity 250 w AES
Program power  500 w
Sensitivity  98 dB 2.83v @ 1m @ 2p
Frequency Range 55-8000 Hz
Recom. enclosure vol.  20 / 70 l 0.7 / 2.6 ft.3
Voice coil diameter 62.4 mm. 2.5 in.
Magnetic assembly weight  4.3 kg. 9.46 lb.
BL factor  12.5 N/A
Moving mass  0.028 kg.
Voice coil length  17 mm.
Air gap height  7 mm.
X damage  24 mm.
 
H.F. Unit
Rated impedance  16 ohms.
Minimum impedance  10.9 ohms.@ 4.5 kHz
Power capacity 40 w AES above 1.5 kHz
Frequency Range 0.7 - 20 kHz
Sensitivity  105 dB
Voice coil diameter 44.4 mm. 1.75 in.
Flux density  1.8 T
BL Factor  10.5 N/A
Dispersion 90º conical