Moteur à compression BMS 4592 ND (neodym)
[4592ND-16+16] Avis/Critiques Features :
- Extended bandwith (300-22000 Hz)
- Neodymium magnet assembly
- With two subsystems in one, each driver covers a smaller frequency range for increased power handling, high dynamic and extremely low distortion
- Excellent phase coherence
- Perfect time alignment without the problems of multi-source interference
- Ultra light weight
The patented design of the BMS 4592 is a result of extensive dedicated research and development providing dramatic improvement in dynamic response, clarity and transparency.
The BMS annular midrange diaphragm covers the frequency range between 300 and 7000 Hz with a smooth, linear response. The large diaphragm excursion of max. + / - 0,8 mm results in high output and increased power handling up to 1300 W peak.
The ultra light annular diaphragm for the high range offers exceptional transient response with very high efficiency from 6 to 22 kHz.
The unique voice coil technology employs a light weight Copper Cld Aluminium wire wound inside and outsde of the Kapton™ former to improve the heat dissipation, dramatically increasing the acoustic output and reliability of the driver while minimises the power compression.
The use of high grade neodymium magnets provide improved performance while significantly reducing transducer weight.
Specifications
Throat diameter 2" (50,8 mm)
Nominal impedance 16 Ohm
Power capacity
Middle range (AES) 150 W above 400 Hz
peak 1.000 W above 500 Hz
High range (AES) 80 W
peak 320 W
Sensitivity 118 dB on 2242 Horn
Frequency range 200 - 22.000 Hz
Recommended crossover 300 Hz
Middle frequency range 300 - 7.000 Hz
High frequency range 6.000 - 22.000 Hz
Middle/High crossover 6.300 Hz
Voice coil high-range 1,75" (44,4 mm)
Voice coil mid-range 3,5 " (90 mm)
Magnet material Neodymium
Flux density high-range 2,0 T
Flux density mid-range 1,95 T
Efficency 35% (300 - 5.000 Hz)
Voice coil material Cooper Clad Aluminium (2 layers
inside and outside of the VC)
Voice coil former Kapton
Diaphragm material Polyester
Mounting information
Overall diameter 132 mm (+ 3 mm)
Depth 113 mm
Net weight 2,3 kg
Four M6 holes, 90° on 101,6 mm, 4" diameter
BMS 4592 ND, 2230 Horn, 1W/1m, 4 V RMS
BMS 4592 ND, 2230 Horn, 1W/1m, 4 V RMS
|
