Haut-parleur FANE Acoustics SOVEREIGN 8-125
[SO8-125-8] Avis/Critiques Medium-power driver ideal for use in PA systems as well as MI and pro-sound applications. Works well as a mid in small sealed boxes and as a mid/bass driver in vented boxes. Great for bass guitar in medium-sized vented cabinets.
Specifications
Nominal Basket Diameter 8.00", 203 mm
Nominal Impedance 8 ohms (1)
Power Rating 125 W2
Usable Frequency Range 52 Hz-4.7k Hz3
Sensitivity 93.7
Magnet Weight 20 oz.
Gap Height 0.24", 5.99 mm
Voice Coil Diameter 1.50", 38.1 mm
Thiele and Small Parameters
Resonance (fs) 73.9 Hz
DC Resistance (Re) 6.8
Coil Inductance (Le) 0.62 mH
Mechanical Q (Qms) 8.30
Electromagnetic Q (Qes) 0.76
Total Q (Qts) 0.70
Compliance Equivalent Volume (Vas) 16.66 liters/0.59 cu. ft.
Peak Diaphragm Displacement Volume (Vd) 68.10 cc
Compliance of Suspension (Cms) 0.26 mm/N
BL Product (BL) 8.6 T-M
Moving Mass inc. Airload (Mms) 17.7 grams
Efficiency Bandwidth Product (EBP) 96.7
Maximum Linear Excursion (Xmax) 3.3 mm
Active Piston Area (Sd) 214.0 cm2
Maximum Mechanical Limit (Xlim) 6.5 mm
Mounting Information
Recommended Enclosure Volume
Sealed 1.00 - 3.00 cu.ft.
Vented 0.30 - 1.30 cu.ft.
Overall Diameter 8.24", 209.30 mm
Baffle Hole Diameter 7.10", 180.34mm
Front Gasket Yes, fitted as standard
Rear Gasket Yes, fitted as standard
Mounting Holes Diameter 0.22", 5.54mm
Mounting Holes B.C.D. 7.79", 197.87mm
Depth 3.30", 83.82mm
Net Weight 4.10 lbs., 1.86 kg
Packing Carton Dimensions 230 x 230 x 120mm
Materials of Construction
Former Material Polyimide
Voice Coil Copper
Magnet Material Ferrite
Basket Material Steel
Cone Description Paper/Cloth Edge
Dust Cap Material Paper
1 Please inquire about alternative impedances.
2 Multiple units exceed published rating evaluated under EIA 426A noise source and test standard while in a free-air, nontemperature-controlled environment.
3 The average output across the usable frequency range when applying 1 W/1 M into the nominal impedance. Ie: 2.83 V/8 ohms, 4 V/16 ohms. Fane response curves are measured under the following conditions:
All speakers are tested at 1 W/1 M using a variety of test set-ups for the appropriate impedance | LMS using 0.25" supplied microphone (software calibrated) mounted 1 M from wall/baffle | 2 ft. X 2 ft. baffle is built
into the wall with the speaker mounted flush against a steel ring for minimum diffraction | Hafler P1500 Trans-Nova amplifier | 2700 cu.ft. chamber with fiberglass on all six surfaces (three with custom-made wedges)
|
