Haut parleur guitare Eminence THE COPPERHEAD™ (RedCoat) [COPPERHEAD-8] Avis/Critiques A venomous 10" American guitar speaker, very bright and prone to bite. Coloration: Extremely balanced vintage tone with a little country honk and a touch of classic blues tone. Genre: Country, Blues, Bluegrass, and Funk. SPECIFICATION Nominal Basket Diameter 10", 254mm Nominal Impedance* 8 ohms Power Rating Watts 75W Music Program Resonance 105Hz Usable Frequency Range 70Hz-5kHz Sensitivity*** 99 Magnet Weight 20 oz. Gap Height 0.312", 7.92mm Voice Coil Diameter 1.5", 38.1mm THIELE & SMALL PARAMETERS Resonant Frequency (fs) 105Hz DC Resistance (Re) 7.59 Coil Inductance (Le) 0.37mH Mechanical Q (Qms) 13.27 Electromagnetic Q (Qes) 1.05 Total Q (Qts) 0.98 Compliance Equivalent Volume (Vas) 27.0 liters / 1.0 cu.ft. Peak Diaphragm Displacement Volume (Vd) 0cc Mechanical Compliance of Suspension (Cms) 0.14mm/N BL Product (BL) 8.8 T-M Diaphram Mass inc. Airload (Mms) 16 grams Efficiency Bandwidth Product (EBP) 100 Maximum Linear Excursion (Xmax) 0.0mm Surface Area of Cone (Sd) 366.1 cm2 Maximum Mechanical Limit (Xlim)
MOUNTING INFORMATION Recommended Enclosure Sealed Acceptable Vented Acceptable Overall Diameter 10.11", 256.8mm Baffle Hole Diameter 9.13", 231.8mm Front Sealing Gasket fitted as standard Rear Sealing Gasket fitted as standard Mounting Holes Diameter 0.23", 5.7mm Mounting Holes B.C. D. 9.6", 243.8mm Depth 4.2", 107mm Net Weight 4.5 lbs., 2 kg Shipping Weight 6.4 lbs., 2.9 kg MATERIALS OF CONSTRUCTION Coil Construction Copper voice coil Coil Former Polyimide former Magnet Composition Ferrite magnet Core Details Non-vented core Basket Materials Pressed steel basket Cone Composition Paper Cone Cone Edge Composition Paper cone edge Dustcap Composition Zurette dust cap
 FOOTNOTES * Please consult eminence.com for specifications of models with alternative impedances. ** Multiple units exceed published rating evaluated under EIA 426A noise source and test standard while in a free-air, non-temperature controlled environment. *** The average output across the usable frequency range when applying 1W/1M into the nominal impedance. Ie: 2.83V/8ohms, 4V/16ohms. Eminence response curves are measured under the following conditions: All speakers are tested at 1w/1m using a variety of test set-ups for the appropriate impedance | LMS using 0.25” supplied microphone (software calibrated) mounted 1m from wall/baffle | 2ft. X 2ft. baffle is built into the wall with the speaker mounted flush against a steel ring for minimum diffraction | Hafler P1500 Trans-Nova amplifier | 2700 cu.ft. chamber with fiberglass on all six surfaces (three with custom-made wedges). **** BETA 8CX, 10CX, 12CX and ACOUSTINATOR™ CX2008 are coaxial speakers with tweeter sold separately. Published Usable Frequency response contingent upon use of APT 50 HF Driver.
|