Compression driver B&C Speakers DCM50 16 ohms
[DCM50-16] Avis/Critiques 
Key Features
160 W continuous program power capacity
2” horn throat diameter
400 – 10000 Hz response
108.5 dB sensitivity
Neodymium magnet assembly
Specifications
Throat Diameter (1) 50 mm (2 in)
Nominal Impedance 16 ohm
Minimum Impedance 8 ohm
Nominal Power Handling (2) 80 W
Continuous Power Handling (3) 160 W
Sensitivity (1W/1m) (4) 108.5 dB
Frequency Range 0.4 -10 kHz
Recommended Crossover (5) 400 Hz
Voice Coil Diameter 51 mm (2 in)
Winding Material Aluminium
Inductance 0.18 mH
Diaphragm Material Composite
Flux Density 2.1 T
Mounting and Shipping Info
Four M6 holes 90° on 102 mm
(4 in) diameter
Overall Diameter 152 mm (6 in)
Depth 108 mm (4.25 in)
Net Weight 3.2 kg (7 lb)
Shipping Weight 3.4 kg (7.5 lb)
Shipping Box 170x170x140 mm (6.7x6.7x5.5 in)
1- Driver mounted on 320 Hz exponential horn
2- 2 hours test made with continuous pink noise signal (6 dB crest factor) within the specified range . Power calculated on rated minimum impedance.
3- Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
4- Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance.
5- 12 dB/oct. or higher slope high-pass filter.
|
