Compression driver B&C Speakers DCX50 16 ohms
[DCX50-16+16] Avis/Critiques 
Key Features
160 W continuous program power capacity
2” horn throat diameter
400 – 16000 Hz response
108.5 dB sensitivity
Neodymium magnet assembly
Time coherent coaxial design
Specifications
Throat Diameter (1) 50 mm (2 in)
Nominal Impedance 8 ohm
Minimum Impedance 16 ohm (MF)
7.0 ohm (HF)
Frequency Range 400-16000 Hz
MF Unit
Sensitivity (1W/1m) (2) 108.5 dB
Nominal Power Handling (3) 80 W
Continuous Power Handling (4) 160 W
Voice Coil Diameter 51 mm (2 in)
Winding Material Aluminium
Diaphragm Material Composite
HF Unit
Sensitivity (1W/1m) (5) 108.5 dB
Nominal Power Handling (6) 20 W
Continuous Power Handling (7) 40 W
Voice Coil Diameter 32 mm (1.2 in)
Winding Material Aluminium
Diaphragm Material Mylar
Recom. Crossover (8) 0.4 kHz (MF) - 9 kHz (HF)
Mounting and Shipping Info
Four M6 holes 90° on 102 mm
(4 in) diameter
Overall Diameter 152 mm (6 in)
Depth 108 mm (4.25 in)
Net Weight 3.3 kg (7.3 lb)
Shipping Weight 3.5 kg (7.7 lb)
Shipping Box 170x170x140 mm
(6.7x6.7x5.5 in)
1- Driver mounted on 320 Hz exponential horn
2- Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance.
3- 2 hours test made with continuous pink noise signal (6 dB crest factor)
within the specified range . Power calculated on rated minimum impedance.
4- Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
5- Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance.
6- 2 hours test made with continuous pink noise signal (6 dB crest factor) within the specified range . Power calculated on rated minimum impedance.
7- Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
8- 12 dB/oct. or higher slope high-pass filter.
|
