Kit d'enceintes DIY Visaton alto line
[5967] Avis/Critiques
KIT DIY, prix affiché pour les accessoires de 2 enceintes acoustiques.
Paire d'enceintes acoustiques en kit, le kit comprend les haut-parleurs, les câbles, les matériaux d'amortissement, les vis de fixation, les borniers de connexions, filtres passifs...
Paire d'enceintes 2 voies avec haut-parleur de basse mid range W170 s et un tweeter DT94
Characteristics and sound properties
This 2-way column speaker, ALTO II, designed as a 30 litre vented system, is another suggested application from the Alto series. The same driver arrangement has been selected as for the ALTO I but, here, the lower range octaves benefit from the enlarged cabinet volume and optimum bass frequency to produce powerful, responsive bass.
ALTO II is also well-suited to improving the sound of low-priced compact hi-fi systems.
The ALTO II can be positioned freely anywhere in the room, producing clearly defined spatial sound character.
Technical Data :
Rated power 60 W
Maximum power 100 W
Nominal impedance Z 4 Ohm
Frequency response 40 - 22000 Hz
Mean sound pressure level 83 dB
(1 W/1 m)
Cut-off frequency 3500 Hz
Principle of Housing Bassreflex
Net volume 28 l
Outer dimension height 800 mm
Outer dimension width 230 mm
Outer dimension depth 230 mm
Construction
In order to simplify the cabinet construction as far as possible, we have done without the chamfers shown in the photo. If you prefer to include the all-round front chamfer, you will need the following information:
Angle: 30°
Width: 10 mm
The cabinet consists of boards stuck together (butt jointed), making construction a simple matter. First of all, the individual boards are cut to size (refer to cutting list), stuck together (butt jointed) as shown in the drawing and firmly clamped for the duration of the drying time using sash-cramps or parcel tape. Once the cabinet has been completely built, the cut-outs are made for the speakers, bass tube and terminals using a jig-saw. The last job is the surface treatment, i.e. painting, veneering or adhesive film.
Inner damping
Its bass reproduction is not only very rich and very powerful, but in addition highly precise, full of detail and free of colouration. Both the base and lower mid-range remained perfectly neutral."
"Music reproduction is airy and far reaching.
Component parts list for 1 box
The kit includes all the components listed here but not the cabinet.
Tweeter: DT 94 8 Ohm 1 piece
Bass-midrange driver: W 170 S 4 Ohm 1 piece
Crossover: Crossover Alto I/II (with terminal, cables und plugs)
Bass reflex tube: BR 15.34 (full length) 1 piece
Damping material: Polyester wool 2 bags
Wood screws: 3,5 x 19 mm 12 pieces Cabinet parts list for 1 box (Parts Size (mm) Quantity)
Cabinet parts list for 1 box
Parts Size (mm) Quantity
Material: 19 mm chipboard or MDF
Front and rear panel 762 x 192 2
Side panel 800 x 230 2
Top and bottom panel 230 x 192 2
Plan détaillé :
|
