Enceinte en Kit Visaton ARIA LIGHT
[K-ARIA LIGHT] Avis/Critiques KIT DIY, prix affiché pour les composants d'une seule enceinte Visaton ARIA LIGHT en kit.
Enceintes acoustiques en kit, le kit comprend les haut-parleurs, les câbles, les matériaux d'amortissement, les vis de fixation, les borniers de connexions, filtres passifs...
Enceintes 2 voies équipées unitairement d'un woofer Visaton W100S et d'un tweeter Visaton G20SC.
Characteristics and sound properties
The ARIA LIGHT is a small-sized 2-band shelf-top speaker system that uses the W 100 S 8 OHM mid-bass unit and the G 20 SC 8 OHM dome tweeter. In smaller rooms and if used as a shelf-mounted unit, the system has a considerable bass foundation which means that a separate subwoofer is not required. However, if coupled with a good powered subwoofer, the range of tonality of far larger hi-fi speakers is achieved.
Technical Data:
Rated power 30 W
Maximum power 50 W
Nominal impedance Z 8 Ohm
Frequency response 65 - 30000 Hz
Mean sound pressure level 82 dB
(1 W/ 1m)
Cut-off frequency 2500 Hz
Principle of Housing Bassreflex
Net volume 3,8 l
Outer dimension height 270 mm
Outer dimension width 160 mm
Outer dimension depth 160 mm
Plan de fabrication pour enceinte Visaton ARIA LIGHT :
CONSTRUCTION
The cabinet body uses 16 mm boards. First of all, cut the holes in the boards and apply the bevels. This can be done using an electric jigsaw or hand-held circular saw set to the required angle. Once the cabinet has been completed, apply the milling work for the loudspeaker. Finally, fit the cones.
Since the cabinets are relatively small, it is hardly possible to mount the crossover inside the housing. It can, however, simply be wrapped in damping material and placed inside the speaker if the rear wall is not removable.
Inner damping
The damping material is loosely arranged in the cabinet.
Component parts list for 1 box
The kit includes all the components listed here but not the cabinet.
Tweeter: G 20 SC 8 Ohm 1 piece
Woofer: W 100 S 8 Ohm 1 piece
Crossover: Crossover ARIA LIGHT
Bass reflex tube: BR 6.8 (full length) 1 piece
Terminal: ST 77 1 piece
Damping material: Polyester wool 0.25 bag
Countersunk screws: 3,5 x 25 mm 13 pieces
Cable: 2x 1,5 mm² 0,75 m
...............
Cabinet parts list for 1 box
Parts Size (mm) Quantity
Material: 16 mm MDF or chipboard
Front, rear panel 270 x 160 2
Side panel 270 x 128 2
Top, bottom panel 128 x 128 2
Schéma du filtre passif de l'enceinte Visaton ARIA LIGHT :
|
