Haut-parleur medium SEAS L18RNX/P
[L18RNX/P-8] Avis/Critiques L18RNX/P is a 6,5” High Fidelity woofer with an injection moulded metal chassis, intended for bass reflex and transmission line designs. Stiff, yet light aluminum cone and low loss rubber surround show no sign of the familiar 500-1500 Hz cone edge resonance and distortion assosiated with soft cones.
Large magnet system gives good transient response, and the bumped back plate together with the very long, and light weight copper clad aluminum voice coil allow for extreme coil excursion with low distortion. Extremely stiff and stable injection moulded metal basket, keeps the critical components in perfect alignment.
Large windows in the basket both above and below the spider reduce sound reflection, air flow noise and cavity resonance to a minimum.
The frequency responses above show measured free field sound pressure in 0, 30, and 60 degrees angle using a 12L closed box. Input 2.83 Vrms, microphone distance 0.5m, normalized to SPL 1m.The dotted line is a calculated response in infinite baffle based on the parameters given for this specific driver. The impedance is measured in free air without baffle using a 2V sine signal.
Nominal Impedance 8 Ohms
Voice Coil Resistance 5.8 Ohms
Recommended Frequency Range 40 - 2500 Hz
Voice Coil Inductance 1.06 mH
Short Term Power Handling * 250 W
Force Factor 7.2 N/A
Long Term Power Handling * 100 W
Free Air Resonance 36 Hz
Characteristic Sensitivity (2,83V, 1m) 88 dB
Moving Mass 13.6 g
Voice Coil Diameter 39 mm
Air Load Mass In IEC Baffl e 0.82 g
Voice Coil Height 18 mm
Suspension Compliance 1.4 mm/N
Air Gap Height 6 mm
Suspension Mechanical Resistance 1.56 Ns/m
Linear Coil Travel (p-p) 12 mm
Effective Piston Area 126 cm2
Maximum Coil Travel (p-p) 22 mm
VAS 30 Litres
Magnetic Gap Flux Density 1.0 T
QMS 2.09
Magnet Weight 0.64 kg
QES 0.36
Total Weight 1.92 kg
QTS 0.31
|
