Haut-parleur SEAS L26RFX/P
[L26RFX/P-8] Avis/Critiques Extremely stiff aluminium cone gives tremendous bass precision.
The cone and the low loss rubber surround show no sign of the familiar cone edge resonance and distortion associated with soft cones. 2” diameter high temperature voice coil with black anodized aluminium coil former gives high power handling and reduced power compression. Large magnet system gives good sensitivity and transient response.
Phase plug reduces compression due to temperature variations in the voice coil, eliminates resonances that would occur in the volume between the dust cap and the pole piece and increases the power handling capacity. Extremely stiff and stable injection moulded metal basket keeps the critical components in perfect alignment.
Large windows in the basket both above and below the spider reduce sound reflection, air flow noise and cavity resonance to a minimum.
The frequency responses above show measured free field sound pressure in 0, 30, and 60 degrees angle using a 28L closed box. Input 2.83 Vrms, microphone distance 0.5m, normalized to SPL 1m.The dotted line is a calculated response in infinite baffle based on the parameters given for this specific driver. The impedance is measured in free air without baffle using a 2V sine signal.
Nominal Impedance 8 Ohms
Voice Coil Resistance 6.3 Ohms
Recommended Frequency Range 20 - 1000 Hz
Voice Coil Inductance 1.83 mH
Short Term Power Handling * 300 W
Force Factor 10.7 N/A
Long Term Power Handling * 125 W
Free Air Resonance 20 Hz
Characteristic Sensitivity (2,83V, 1m) 88 dB
Moving Mass 53.0 g
Voice Coil Diameter 51 mm
Air Load Mass In IEC Baffl e 3.48 g
Voice Coil Height 20 mm
Suspension Compliance 1.2 mm/N
Air Gap Height 6 mm
Suspension Mechanical Resistance 3.3 Ns/m
Linear Coil Travel (p-p) 14 mm
Effective Piston Area 330 cm2
Maximum Coil Travel (p-p) 35 mm
VAS 171 Litres
Magnetic Gap Flux Density 1.23 T
QMS 2.15
Magnet Weight 1.30 kg
QES 0.39
Total Weight 4.05 kg
QTS 0.33
|
