Fiche XLR 3 points Neutrik Femelle NC-3-FXX
[NC3FXX] Avis/Critiques Produit vendu à l'unité, prix affiché pour une pièce.
The next generation of the worldwide accepted standard of XLR cable connectors. The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.
3 pole female cable connector with Nickel housing and silver contacts.
Features & Benefits
Unique cage design of female contact for low contact resistance and high integrity
Female contact incorporates a solder barrier to prevent solder running into the contact mating area
Female connector with improved solid metal latch which is larger and easier to handle
Additional ground spring contacts for better shell ground continuity
Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
Boot with polyurethane gland gives high protection to cable bending stresses
Colored rings and boots available for coding or identification
Sleek and ergonomic design - valuable and handy
Rugged zinc diecast shell, longlasting and dependable
Le consensus de l'AES (Audio Engineering Society) exige le brochage suivant : broche 1 : masse, broche 2 : point chaud (signal à transmettre dans sa polarité d'origine), broche 3 : point froid (signal à transmettre avec sa polarité inversée). Certains appareils peuvent voir leurs broches 2 et 3 inversées: ceci est dû à la norme américaine, qui place le point chaud sur la troisième broche. Il convient donc de se réferer au manuel de l'appareil ou aux éventuelles sérigraphies sur le boîtier.
| Product |
| Connector Type |
XLR |
| Gender |
female |
| Electrical |
| Capacitance between contacts |
≤ 4 pF |
| Contact resistance |
≤ 3 mΩ |
| Dielectric strength |
1,5 kVdc |
| Insulation resistance |
> 2 GΩ (initial) |
| Insulation resistance |
> 1 GΩ (after damp heat test) |
| Rated current per contact |
16 A |
| Rated voltage |
50 V |
| Mechanical |
| Cable O.D. |
3.5 - 8.0 mm |
| Insertion force |
≤ 20 N |
| Withdrawal force |
≤ 20 N |
| Lifetime |
> 1000 mating cycles |
| Wire size |
max. 2.5 mm² |
| Wire size |
max. 14 AWG |
| Wiring |
Solder contacts |
| Locking device |
Latch lock |
| Material |
| Boot |
Polyuretan |
| Bushing |
Polyamide (PA 6 15% GR) |
| Contact plating |
2 µm Ag |
| Contacts |
Bronze (CuSn8) |
| Insert |
Polyamide (PA 6.6 30 % GR) |
| Locking element |
Zinc diecast (ZnAl4Cu1) |
| Shell |
Zinc diecast (ZnAl4Cu1) |
| Shell plating |
Nickel |
| Strain relief |
Polyacetal (POM) |
| Environmental |
| Flammability |
UL 94 HB |
| Standard compliance |
IEC 61076-2-103 |
| Protection class |
IP 40 |
| Solderability |
Complies with IEC 68-2-20 |
| Temperature range |
-30 °C to +80 °C |
Features & Benefits
|
