Chassîs XLR 3 points Neutrik Mâle NC-3-MDLX
[NC3MD-LX] Avis/Critiques Produit vendu à l'unité, prix affiché pour une pièce.
The DLX series features a compact all metal housing with an ingenious duplex ground contact, which offers excellent RF protection and shielding. It is the ideal match for mating with Neutrik's EMC XLR cable connector.
3 pole female receptacle, solder cups, Nickel housing, silver contacts
Features & Benefits
All metal housing offers best overall RF protection and electromagnetic shielding
New duplex ground contact for excellent contact integrity between chassis and cable connector
Unique cage type female contact on 3 pole version increases conductivity and reduces wear on the mated male contact
Female contact incorporates a solder barrier to prevent solder running into the contact mating area
Larger solder contacts for easier termination
Optional connection to easily join pin1 to chassis ground
D-style housing provides installation compatibility with industry standard D mounting dimensions
Le consensus de l'AES (Audio Engineering Society) exige le brochage suivant : broche 1 : masse, broche 2 : point chaud (signal à transmettre dans sa polarité d'origine), broche 3 : point froid (signal à transmettre avec sa polarité inversée). Certains appareils peuvent voir leurs broches 2 et 3 inversées: ceci est dû à la norme américaine, qui place le point chaud sur la troisième broche. Il convient donc de se réferer au manuel de l'appareil ou aux éventuelles sérigraphies sur le boîtier.
| Product |
| Connector Type |
XLR |
| Gender |
male |
| Electrical |
| Capacitance between contacts |
≤ 4 pF |
| Contact resistance |
≤ 5 mΩ |
| Dielectric strength |
1,5 kVdc |
| Insulation resistance |
> 2 GΩ (initial) |
| Insulation resistance |
> 1 GΩ (after damp heat test) |
| Rated current per contact |
16 A |
| Rated voltage |
50 V |
| Mechanical |
| Insertion force |
≤ 20 N |
| Withdrawal force |
≤ 20 N |
| Lifetime |
> 1000 mating cycles |
| Wire size |
max. 2.5 mm² |
| Wire size |
max. 14 AWG |
| Wiring |
Solder contacts |
| Locking device |
latch lock |
| Mounting direction |
front & rear |
| Chassis shape |
D |
| Material |
| Contact plating |
2 µm Ag over 2 µm Ni |
| Contacts |
Brass (CuZn35Pb2) |
| Insert |
Polyamide (PA 6.6 30 % GR) |
| Locking element |
Steel Ck67 |
| Shell |
Zinc diecast (ZnAl4Cu1) |
| Shell plating |
Nickel |
| Environmental |
| Flammability |
UL 94 HB |
| Standard compliance |
IEC 61076-2-103 |
| Solderability |
Complies with IEC 68-2-20 |
| Temperature range |
-30 °C to +80 °C |
|
