Fiche XLR 3 points Neutrik Mâle NC-3-MXX
[NC3MXX] Avis/Critiques Produit vendu à l'unité, prix affiché pour une pièce.
The next generation of the worldwide accepted standard of XLR cable connectors. The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.
3 pole male cable connector with Nickel housing and silver contacts.
Features & Benefits
Male connector with improved locking recess without "window", more stringent housing increases durability
Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
Boot with polyurethane gland gives high protection to cable bending stresses
Colored rings and boots available for coding or identification
Sleek and ergonomic design - valuable and handy
Rugged zinc diecast shell, longlasting and dependable
Le consensus de l'AES (Audio Engineering Society) exige le brochage suivant : broche 1 : masse, broche 2 : point chaud (signal à transmettre dans sa polarité d'origine), broche 3 : point froid (signal à transmettre avec sa polarité inversée). Certains appareils peuvent voir leurs broches 2 et 3 inversées: ceci est dû à la norme américaine, qui place le point chaud sur la troisième broche. Il convient donc de se réferer au manuel de l'appareil ou aux éventuelles sérigraphies sur le boîtier.
| Product |
| Connector Type |
XLR |
| Gender |
male |
| Electrical |
| Capacitance between contacts |
≤ 4 pF |
| Contact resistance |
≤ 3 mΩ |
| Dielectric strength |
1,5 kVdc |
| Insulation resistance |
> 2 GΩ (initial) |
| Insulation resistance |
> 1 GΩ (after damp heat test) |
| Rated current per contact |
16 A |
| Rated voltage |
50 V |
| Mechanical |
| Cable O.D. |
3.5 - 8.0 mm |
| Insertion force |
≤ 20 N |
| Withdrawal force |
≤ 20 N |
| Lifetime |
> 1000 mating cycles |
| Wire size |
max. 2.5 mm² |
| Wire size |
max. 14 AWG |
| Wiring |
Solder contacts |
| Locking device |
latch lock |
| Material |
| Boot |
Polyuretan |
| Bushing |
Polyamide (PA 6 15% GR) |
| Contact plating |
2 µm Ag |
| Contacts |
Brass (CuZn39Pb3) |
| Insert |
Polyamide (PA 6.6 30 % GR) |
| Locking element |
Zinc diecast (ZnAl4Cu1) |
| Shell |
Zinc diecast (ZnAl4Cu1) |
| Shell plating |
Nickel |
| Strain relief |
Polyacetal (POM) |
| Environmental |
| Flammability |
UL 94 HB |
| Standard compliance |
IEC 61076-2-103 |
| Protection class |
IP 40 |
| Solderability |
Complies with IEC 68-2-20 |
| Temperature range |
-30 °C to +80 °C |
|
