18 Sound 10MB600 (16Ohm)

Marque 
Eighteen Sound
Référence 
10MB600
Code TLHP 
10MB600-16
Type produit 
Haut parleur à cône
Conditionnement de vente 
Vendu par Unité
Marque
Eighteen Sound
Référence
10MB600
Code TLHP
10MB600-16
Type produit 
Haut parleur à cône
Conditionnement de vente 
Vendu par Unité
18 Sound 10MB600 (16Ohm)

dimensions & montage du haut parleur à cône Eighteen Sound 18 Sound 10MB600 (16Ohm)

Disponibilité spéciale
  • 98 dB SPL 1W / 1m average sensitivity
    75 mm (3 in) Interleaved Sandwich Voice coil (ISV)
    450 W AES power handling
    Weather protected cone and plates for outdoor usage
    Excellent transient response
    Improved heat dissipation via unique basket design
    Ideal for compact two way and multiway systems

    The 10MB600 mid-bass transducer represents a development of the 10M600 midrange, combining excellent linearity with high efficiency and high power handling capabilities. The 10MB600 is primarily intended for use as a midbass driver in extremely compact 2-way reflex enclosures between 10 and 40 lt.

    Its curvilinear paper cone is formed using a special high strength wood pulp, designed to achieve the best possible rigidity and stiffness. An exclusive treatment is also applied to the cone to increase its water repellent properties.
    The 75 mm state-of-the-art voice coil is similar to those fitted to our top-of-the-range 18" and 15" models but it is wound with aluminum wire.
    The coil also employs our Interleaved Sandwich Voice coil (ISV) technology. A high strength fiberglas former carries windings on both the outer and inner surfaces to achieve a mass balanced coil, resulting in an extremely linear motor assembly with a reduced tendency for eccentric behavior when driven hard.
    The voice coil cooling is achieved using airways between the chassis back plate and the face plate of the magnet which allow heated air from the voice coil and gap to be channeled away and dissipated by the chassis basket. This technology is a result of 3D CAD resource application by our engineers.
    The top and back plates of the magnet assembly have been designed to optimise flux density and BL factor in the air gap also using our in-house FEA CAD facility.
    In addition, a special treatment is applied to the top and back plates making the transducer far more resistant to the corrosive effects of salts and oxidization. Hence, the equipment is able to perform outdoors in inclement weather conditions.

  • 25 cm
  • 16 ohm
  • 8.2kg


Question à propos de Eighteen Sound 10MB600-16

Poser une nouvelle question

Le système de question / réponse est proposé uniquement pour répondre aux questions d'ordre technique.
Pour les questions de tarifs, disponibilités produits et délai merci d'adresser votre demande par la page contact du site ou suivant la procédure décrite sur cette page s'il s'agit d'une demande de devis.


Use Eighteen Sound 10MB600-16

Cette liste d'articles est gérée manuellement par l'équipe TLHP en fonction de son expérience et sa connaissance des produits.


Informations Eighteen Sound 10MB600-16

98 dB SPL 1W / 1m average sensitivity
75 mm (3 in) Interleaved Sandwich Voice coil (ISV)
450 W AES power handling
Weather protected cone and plates for outdoor usage
Excellent transient response
Improved heat dissipation via unique basket design
Ideal for compact two way and multiway systems

The 10MB600 mid-bass transducer represents a development of the 10M600 midrange, combining excellent linearity with high efficiency and high power handling capabilities. The 10MB600 is primarily intended for use as a midbass driver in extremely compact 2-way reflex enclosures between 10 and 40 lt.

Its curvilinear paper cone is formed using a special high strength wood pulp, designed to achieve the best possible rigidity and stiffness. An exclusive treatment is also applied to the cone to increase its water repellent properties.
The 75 mm state-of-the-art voice coil is similar to those fitted to our top-of-the-range 18" and 15" models but it is wound with aluminum wire.
The coil also employs our Interleaved Sandwich Voice coil (ISV) technology. A high strength fiberglas former carries windings on both the outer and inner surfaces to achieve a mass balanced coil, resulting in an extremely linear motor assembly with a reduced tendency for eccentric behavior when driven hard.
The voice coil cooling is achieved using airways between the chassis back plate and the face plate of the magnet which allow heated air from the voice coil and gap to be channeled away and dissipated by the chassis basket. This technology is a result of 3D CAD resource application by our engineers.
The top and back plates of the magnet assembly have been designed to optimise flux density and BL factor in the air gap also using our in-house FEA CAD facility.
In addition, a special treatment is applied to the top and back plates making the transducer far more resistant to the corrosive effects of salts and oxidization. Hence, the equipment is able to perform outdoors in inclement weather conditions.
Type produit Haut parleur à cône
Lien site fabricant Eighteen Sound
Poids 8.2 kg
Poids volumétrique 2.52 kg

Les informations techniques présentées sur cette page produit sont fournies à titre indicatif, il est possible que certaines informations soient indisponibles ou erronées. Le fabricant peut modifier les caractéristiques du produit à tout moment sans prévenir dans le but de l'améliorer ou pour s'adapter à des contraintes propres à sa production ou ses circuits d'approvisionnements. Nous vous invitons à nous contacter si vous avez besoin d'informations complémentaires, si vous remarquez une erreur ou si vous souhaitez avoir confirmation d'une information.

Dimensions

Image Dimensions & Montage (1/2) haut parleur à cône Eighteen Sound 18 Sound 10MB600 (16Ohm)
Image Dimensions & Montage (2/2) haut parleur à cône Eighteen Sound 18 Sound 10MB600 (16Ohm)


En poursuivant votre navigation sur ce site, vous acceptez l’utilisation de Cookies ou autres traceurs pour réaliser des statistiques de visites. En savoir plus
En poursuivant votre navigation sur ce site, vous acceptez l’utilisation de Cookies ou autres traceurs pour réaliser des statistiques de visites. En savoir plus